1. Distinguish the function of the engraving machine. The engraving motor of the engraving machine has high power and low power. The power of some engraving machines is only suitable for the processing of two-color boards, architectural models, small signage, three-dimensional handicrafts, etc. The engraving machine of this process has entered the market for a long time, but its use is too small to limit its use. range. There are two other types of high-power engraving machines: one is a large-format cutting machine, the width is generally more than one meter, but the precision of this engraving machine is generally poor; the other is a medium-sized engraving machine. This engraving machine is commonly used in the production of fine processing and organic signage.
2. Understand the performance and function of the engraving machine. The motor part of the engraving head is very important. Under normal circumstances, the engraving head motor is not covered by the warranty. However, the engraving head motor is often used for a long time and is easy to damage. If the quality of the engraving head motor is not Good will directly affect the use of the engraving machine.
3. The speed of the engraving head motor can be adjusted: the range of the motor speed of the general engraving head is about several thousand to 30,000 revolutions per minute. If the speed of the engraving head motor cannot be adjusted or the range of adjustment is small, then The range of applications of this engraving machine is very limited, and different engraving heads must be rotated with different engraving head speeds.
4. Manufacturing process of engraving machine: When the high-power engraving machine works, the engraving machine body should be precise and stable. The long-term high-power engraving should adopt the casting body to ensure the precision and stability of the machining.
5. The controller is divided into two categories: one is to drive only, and all the calculations are done by computer. When the engraving machine is working, the computer is in a waiting state, and it is impossible to typeset. Another kind of controller is controlled by a single board machine or a single chip microcomputer. This kind of controller is actually a computer. When the engraving machine is working, other typesetting can be performed immediately. The advantage of this kind of controller is quite obvious.
6. The screw and guide rail are important components of the engraving machine. The good screw and guide rail can ensure the precision and stability of the engraving machine in long-term operation. This part is also very important.
