Technical parameters of TIMKEN bearings

TIMKEN bearings are designed for a combination of radial and axial loads. Single row bearings have a high unidirectional thrust capability. Some single-row TIMKEN bearings are specifically designed for a two-way installation for optimum performance. Double row Conrad bearings can withstand thrust in both directions.
The special geometry of the channel and shoulder of the TIMKEN bearing creates a ball contact angle that can withstand higher axial loads. Different designs have a range of contact angles from 20° to 40°. The contact angle of the TIMKEN bearing provides greater axial load capacity and a longer service life under axial and radial loads.
TIMKEN bearing:
Size range from 3 mm to 600 mm
Extended option
    Special coating for corrosion protection
Special seal design
Fafnir radial ball bearings use a universal design that allows relatively high speed operation under large load conditions. The TIMKEN bearing consists of an inner ring and an outer ring and has a cage with a set of precision balls.
Standard Conrad bearings have a deep groove structure that can carry both radial and axial loads in either direction. The maximum load type mainly supports radial load.
From ultra-light to heavy, it offers a very wide range of sizes. A variety of protective and sealing arrangements help protect internal bearing components and retain lubricant.
TIMKEN bearings are designed to meet the high speed, precision and hardness requirements of demanding machine tools. These TIMKEN bearings can be produced for the highest precision standards recognized by ABEC-7 to ABEC-9, the ball bearing industry.
Most ultra-precision ball bearings have a contact angle of 15° to 25° to accommodate different combinations of radial and axial loads. Special channel treatment and ball bearing design for the highest possible working speed.
Hybrid ceramic bearings are available with steel ceramics and ceramic balls to accommodate high speed and other demanding applications.
The ball spiral bearing is supplied in a complete package with a 60° contact angle and maximum ball compensation, suitable for high load and axial hardness requirements for most precision tool positioning.

https://www.supplyforever.com/