What should I do with the rust removal of the woodworking machine spindle motor?

The rust of the woodworking engraving machine spindle is a problem that plagues many users. Because of the working environment, if the maintenance is not timely, the spindle motor is easy to rust, and slight rust does not affect the normal use of the spindle motor, but if it is not handled for a long time, the life of the spindle motor will be shortened. Woodworking engraving machine spindle motor rust removal method:
First, by hand knocking, shovel, scraping, brushing, sand or flexible frustration to eliminate the appearance of scale, scale, etc., this is the painter radical derusting method, you can also use a blade, scraper, pointed hammer, wire brush , abrasive cloth, broken saw blade and other tools, this method is relatively simple, but it is also easy to damage the machine. Maintenance personnel need to be very careful when removing rust. It is easy to cause the machine spindle to deviate from the track without paying attention.
Second, use a clean lubricant, evenly sprayed on the motor, about half an hour you can use a cotton cloth to wipe off the rust on the stone engraving machine, if the rust is severe, you can spray a few times more lubricant. Lubricating cleaners are non-conductive and have good lubrication.

Three major mistakes that should be noticed by amateur woodworking engraving machine

There are many woodworking engraving machines on the market, and woodworking engraving machines are also very expensive. Since the cabinet door engraving machine is a kind of machine after all, the consumer is not a professional, can only see the surface, there is no way to judge the quality, facing the introduction of the salesperson, only sigh "can not touch the doorway", in the woodworking When buying an engraving machine, be careful to avoid three major mistakes.
Misunderstanding 1: The solid wood engraving machine does not have to use a cast iron bed. Many consumers think that only cast iron is good. In fact, the cast iron bed is very expensive. As long as the bed of thick-walled steel tube is treated by failure and reaches the required thickness, because we process wood, it is not very heavy. .
Misunderstanding 2: Don't want a big horse-drawn car, not to buy a woodworking machine. The main thing is to look at the configuration. It is like buying a computer. It integrates the products processed by itself to require the configuration of the woodworking engraving machine, like playing games. Like a computer with a good card, be sure to match your engraving machine to your own processing requirements. Don't look at the flashy configuration. Choosing the right one is the best.
Misunderstanding 3: The price of woodworking engraving machine is uneven, what is cost-effective? Many consumers have seen the price of woodworking engraving machines and thought it was the price of the whole machine. In fact, the price of woodworking engraving is three parts: the price of the whole machine, the tax and the freight. The above said that the choice of engraving machine also depends on the specific configuration, different configurations of different prices.
In addition, to ask the factory tax is a few points of tax, as well as freight, a comprehensive point to get the final amount you will spend to buy the machine. Pin-pulse CNC, woodworking engraving machine manufacturing experts, quality pulse to do the most cost-effective engraving machine.