If you use the woodworking engraving machine for a long time, you will inevitably find that it has a touch of sound or a sharp metal friction sound when you turn it on. You will also find that there are a lot of wood chips in the pores. In this case, the machine is actually reminding you to do maintenance work. The tools before maintenance should be prepared, such as universal needle oil, such as small brush and needle-nosed pliers, and a screwdriver and cross. When the maintenance of the woodworking engraving machine is officially carried out, the first step should be to unplug the power cord of the machine to ensure the safety during maintenance. Then remove the plastic sheath of the wood engraving machine and re-select the cross screwdriver to reverse At the hour hand, remove the two screws. Then use the needle-nosed pliers to remove the internal carbon brush for cleaning. To clean the carbon brush, use a brush to ensure that the dust on the carbon brush is cleaned. Finally, use the universal needle. The car oil can be used to lubricate the laundry equipment.
What is the difference between a cutting machine and an engraving machine?
With the development of the panel furniture industry, furniture factories have replaced traditional furniture production methods with CNC equipment. However, due to the lack of understanding of CNC equipment, many furniture manufacturers often fall into the low-cost sales misunderstanding of some cutting machine manufacturers, often so low.
Price sales can be confusing for many bosses. What is the difference between a cutter and an engraving machine?
In fact, there are ways to distinguish blind spot cutters:
1. First, for a cutter, each knife has a single operation, and each additional tool means more than one operating system. The more complex the equipment, the more expensive it is.
2. The bed also has a great influence during the post-treatment process. The heavy-duty cutting machine body can make the center of gravity of the cutting machine down. If the bed frame is not thick enough, the processed product is not qualified.
Then there will be problems such as leakage welding, open welding, materials used on the bed, etc.
3 . This is the operating system used by the cutting machine. For some rigorous furniture factories, the new generation system, Baoyuan system and Weihong system are generally adopted, but the market value of this operating system is about 1-2 million.
The yuan is not the same, but for some manufacturers with low processing requirements, you can choose a normal system, cost-effective, and the price is very acceptable.
If the feeder manufacturer's seller tells you that the system is very high-end but the price is relatively cheap, then there is no doubt that it may be pirated. The pirated software is not used after sale. Software engineers will resolve any issues with genuine software.
It can be replaced when it is available.
4. The control system is very human, the brain is smart enough, and the limbs are developed.
The spindle is different from the engraving machine and needs to use high power, generally 4.5kw, 6kw, 9kw, 12kw; for high power spindle, the average spindle should be added 1000-2000; the pump or air pump should be 7.5kw, if it changes 11kw,
5000 or so; Rack 1.5 mold, slider 25, 30 start, each block at least 200, rack more than 1000 meters; drive motor has domestic, imported, to meet high speed and high precision, improve work efficiency or
It is best to choose import, the market price is about 3000; the reducer is used to control the import speed of the equipment better, the high-precision wheel train can effectively increase the torque, the equipment keeps starting and stopping, if the speed reducer does not
Good will affect the service life of the servo motor, it will take time and effort to replace it again.
5. The market size of the furniture model is 1200mm * 2400mm, so the size of the 1325 series material cutting machine manufacturer is now 1300mm * 2500mm. If the size of the sample is large, the size of the machine will be larger.
There are 2000mm * 2500mm, 2500mm * 2500mm, generally about 5000.
订阅：
博文 (Atom)