The stone engraving machine operates very much in the engraving factory, so the damage caused to this machine is also relatively large. If you want to make this machine work better, or to extend the life of its use, then you should pay attention to maintenance in your daily life. For the engraving machine, the most important maintenance is the following aspects.
1. Working hours. Many manufacturers will let an engraving machine work 24 hours a day, such a machine failure and the life of the use is lower than the normal use of the machine. In fact, with the engraving machine, the stone engraving machine manufacturer recommends not to last more than ten hours, which is the limit value. At this time, the machine is very easy to malfunction.
2. Lubrication. The engraving machine runs a lot, so there is a lot of problem of subject lubrication. Lubricate should be sufficient, that is, to allow the lubricant to penetrate the parts of the machine that require lubrication, so it is best to have a professional maintenance person lubricate the machine. In addition to being adequate, lubrication is also comprehensive.
3. Clean up afterwards. For the engraving machine, clean it every time it is used up. This is a problem that many people will ignore when they use it. In fact, if they are not cleaned, it is easy to have stone chips or debris stuck on the machine or some tracks. This is the second time that the use of the disorder is disordered.
