Understand the daily maintenance and maintenance necessary for the stone engraving machine

The stone engraving machine is a precision numerical control equipment. Today, Xiaobian tells you that the necessary daily maintenance and maintenance is essential to the service life and accuracy of the machine. Please perform the maintenance and maintenance as described below.
1. The continuous running time is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, the water in the water tank can be replaced with antifreeze.
Second, each time the machine is used, it is necessary to pay attention to cleaning. It is necessary to clean the dust on the platform and the transmission system, and regularly and weekly (weekly) lubricate the transmission system (X, Y, Z three axes). (Note: X, Y, Z three-axis polished rods are maintained with oil; high-speed butter is added to the screw; in winter, if the working environment temperature is too low, the screw, polished rod (square rail or circular guide) should be cleaned with gasoline first. Then add the oil, otherwise it will cause the resistance of the machine transmission part to be too large and cause the machine to be misaligned.)
Third, the maintenance inspection of the electrical appliance is, must cut off the power supply, until the monitor has no display and the main circuit power indicator is off, before maintenance
As for the protection of other parts of the stone engraving machine, such as pumps. Cutting the main shaft, the two are each other, always replace the circulating water, adhere to the water and water temperature to block the water pump outlet or the water-cooled cutting spindle works at high temperatures to form component damage.
Through the understanding of the above-mentioned stone engraving machine, I hope to help you.

Woodworking engraving machine operation and maintenance knowledge

Training before use is a must, otherwise do not operate, otherwise it is prone to failure, and also damage the life of CNC woodworking engraving machine.
Steps:
1. Theoretical basis of CNC woodworking engraving machine:
The training must start from the theoretical training work, and the operator must conduct practical training under the condition that the theoretical assessment is passed. If the theoretical training is not passed, it is absolutely impossible to conduct operational training.
2. The use of CNC woodworking engraving machine tools:
After the theoretical training, the training of CNC woodworking engraving tools must be carried out. Operators must be aware of common tools, engraving motor speeds, travel speeds, precautions, etc. Operators must be familiar with the application of the tool.
3, CNC woodworking engraving machine application range:
The operator must be familiar with the range of engraved plates of CNC woodworking engraving machines, familiar with different materials, different thicknesses, different finished products and so on. Familiar with different engraving methods for different materials.
4, CNC woodworking engraving machine various software operations:
Software training is available after the above training. The training of the software is mainly concentrated in the field of user application; the aspects that are not required by the user can be self-learned according to the training manual. The software requirements are: various types of software layout, various operations, path generation, and the ability to quickly find path errors.
5, CNC woodworking engraving machine operation training:
After the above various trainings, after the training personnel explained and the operator's understanding and assessment: the operator's operation safety and operation precautions are trained, and the trainees sign and approve the operation safety matters, the operator The CNC machine wood engraving machine can be tested for operation.
6, note:
CNC woodworking engraving machine for the operation of various precautions and engraving machine maintenance training.