What is the difference between an advertising cutter and an engraving machine?

1. The biggest difference between an advertising cutter and an engraving machine is whether the z-axis can be moved.

When the advertising cutter is cutting, the Z axis is not movable, that is, the depth of the cutting is not changed.

When the advertising engraving machine is engraving, the Z axis is movable, and as for the movement, it is determined by the path.

At present, there are many advertising cutters that can be used as engraving machines in some occasions. However, the conditions of use are limited.

2, the main role is different.

The advertising cutter is mainly used for cutting; the advertising engraving machine is mainly used for engraving.

The difference between the advertising cutter and the engraving machine is known. We said how to maintain the advertising engraving machine in the winter.

1. The advertising engraving machine generally runs for less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, the water in the water tank can be replaced with antifreeze.

2, each time the machine is used, pay attention to cleaning, be sure to clean the dust on the platform and transmission system, and regularly (weekly) lubricate the transmission system (X, Y, Z three axes). (Note: X, Y, Z three-axis polished rods are maintained with oil; high-speed butter is added to the screw; in winter, if the working environment temperature is too low, the screw, polished rod (square rail or circular guide) should be flushed with gasoline first. Clean and then add the oil, otherwise it will cause excessive resistance in the transmission part of the machine and cause the machine to be misaligned.)

3. When performing maintenance inspection on the electrical appliance, be sure to turn off the power supply, and wait until the monitor has no display and the main circuit power indicator is off.

4. The engraving machine should be inspected for fasteners for about three months. The connecting screws on both sides of the gantry, the fastening screws of the screw nut, and the fastening screws on both sides of the motor are tightened.

How does the advertising engraving machine choose the knife type?

1. Single-blade milling cutter is used to cut acrylic material. It is characterized by brightening of the cutting surface. If there is no special requirement, no polishing is required.

2, double edge milling cutter, used to cut acrylic, MDF and so on. The cutting surface is smooth, but there is no light.

3, column knife, used to cut acrylic material, the side is smooth, no need to press the board. In addition, the column knife can also be used for scribing, back carving and the like.

4, sharp knife, used to engrave words, relief, back carving, badges and so on.